Canada Tile stores

RLA Flex 2-Part (Resinflex)- Flexible Cement Based Tile Adhesives – Technical Data Sheet

tiler1 — Tue, 08 May 2012 10:43:49 +0000

RLA Flex 2-Part (Resinflex) Flexible Cement Based Tile Adhesives
RLA Flex 2-Part (Resinflex) is a premium grade, super flexible cement based tile adhesive designed to withstand movement in the substrate, where conventional adhesives are too rigid.

* It is designed for bonding all types of ceramic, stone and mosaic tiles with the exception of light coloured and Green Marble, onto a variety of substrates like concrete, render, rendered brickwork, block work Gyprock, plasterboard, fibre cement, particle board and tongue and groove timber surfaces.
* It can be used internally and externally on wall and floor surfaces.
* RLA Flex 2-Part (Resinflex) can be used for fixing low porosity tiles.
* Size 1Ltr / 2kg kit
* Size 4Ltr / 8kg kit
* Size 10Ltr / 20kg kit
* Size 20Ltr / 40kg kit.

RLA Polymers Pty Ltd – High tech polymers, fibres & fabrics
PO Box 97-575, South Auckland Mail Centre, New Zealand

Phone: +64 (9) 267 2772. Fax: +64 (9) 268 0305. Email: john.harvie@rlapolymers.co.nz

RLA F55 TDS Flexible two component, elastomeric Tile Adhesives – Technical Data Sheet

tiler1 — Tue, 08 May 2012 10:43:48 +0000

F55 TDS Flexible Tile Adhesives

F55 is a unique, reactive two component, elastomeric adhesive suitable for both internal and external applications that requires rapid set, a high degree of flexibility and waterproof finish.

    * F55 can be used to adhere a wide variety of products including, wood plant, cork, rubber tiles, ceramic tiles, stone and more.
    * F55 is typically applied to: Butyl rubber membranes, EPDM rubber membranes, Bituminous torch down membranes, Concrete, Render, Brickwork, fibre cement sheets, heated floor slabs, Plasterboards, Particle board, most solvent free membranes, Steel, and Aluminum.
    * Due to the curing mechanism, F55 is an adhesive that is suitable for problematic applications and small tiling jobs that need to be flexible and laid and grouted in one day.
    * F55 is only slightly affected by cold climate and is the recommended adhesive for laying tiles onto impermeable membranes.
    * Size 20Lt / 10kg
    * Download technical data sheet for F55 (pdf)

RLA Polymers Pty Ltd – High tech polymers, fibres & fabrics
PO Box 97-575, South Auckland Mail Centre, New Zealand

Phone: +64 (9) 267 2772. Fax: +64 (9) 268 0305. Email: john.harvie@rlapolymers.co.nz

DUNLOP TILE-ALL Adhesive-Technical Data Sheet

tiler1 — Tue, 08 May 2012 10:43:47 +0000

DUNLOP TILE-ALL Adhesive-Technical Data Sheet

DUNLOP TILE-ALL is a wall and floor tile adhesive which can be used to fix almost all tiles over many difficult to adhere to surfaces.

TILE TYPES

Ceramic tiles, mosaics, porcelain, fully vitrified and natural stone (excluding moisture sensitive stone).

SUBSTRATES

Existing tiles, glazed ceramic tiles, metal, steel trowelled concrete, roughened fibreglass, timber (particleboard only)

LOCATION

Indoor, outdoor water features and swimming pools

SURFACES

Walls and Floors

DUNLOP TILE-ALL Adhesive-Technical Data Sheet
DUNLOP TILE-ALL is a wall and floor tile adhesive which can be used to fix almost all tiles over many difficult to adhere to surfaces. TILE TYPESCeramic tiles, mosaics, porcelain, fully vitrified and natural stone (excluding moisture sensitive stone).

SUBSTRATESExisting tiles, glazed ceramic tiles, metal, steel trowelled concrete, roughened fibreglass, timber (particleboard only)

LOCATIONIndoor, outdoor water features and swimming pools

SURFACESWalls and Floors

TILE-ALL ADHESIVE LIQUID MSDS

TILE-ALL ADHESIVE POWDER MSDS

DUNLOP is a trademark of Ansell Limited and is used under license by ARDEX in Australia and New Zealand.

http://www.dunlopdiy.com
ARDEX AUSTRALIA PTY LTD20 Powers RoadSeven Hills NSW 2147Ph: +61 2 9851 9199Fax: +61 2 9674 5621
ARDEX NEW ZEALAND LTD32 Lane Street WoolstonChristchurch, New ZealandPh: + 64 3 384 3029Fax: + 64 3 384 9779

DUNLOP TOLL FREE SERVICE:1800 222 841 (Aust)0800 224 070 (NZ)
EMAIL: techinfo@ardexaustralia.com

Dunlop Wall and Floor Tile Adhesive-Technical Data Sheet

tiler1 — Tue, 08 May 2012 10:43:47 +0000

DUNLOP FLOOR TILE ADHESIVE-Technical Data Sheet

DUNLOP FLOOR TILE ADHESIVE is a general purpose ceramic tile adhesive for fixing all types of floor tiles both inside and out.

TILE TYPES

Ceramic tiles, fully vitrified, mosaics, porcelain, natural stone (excluding moisture sensitive stone)

SUBSTRATES

Concrete, compressed fibre cement sheets, cement screeds, existing tiles.

LOCATION

Indoor and Outdoor

SURFACES

Floors

Dunlop Wall and Floor Tile Adhesive-Technical Data Sheet

Dunlop Wall and Floor Tile Adhesive is specially formulated to suit most tile types over many different surfaces including timber (indoors).

TILE TYPES Ceramic tiles, fully vitrified, mosaics, porcelain, natural stone (excluding moisture sensitive stone)

SUBSTRATES Fibre-cement sheets, plasterboard, cement render and concrete, existing vinyl tiles, DUNLOP UNDERTILE WATERPROOFING, existing ceramic tiles, metal surfaces, painted surfaces (oil based only), timber (indoor only).

LOCATION Indoor and Outdoor (providing there is no standing water and sufficient fall for water run-off)

SURFACES Walls and Floors

Technical Data Sheet

DUNLOP is a trademark of Ansell Limited and is used under license by ARDEX in Australia and New Zealand.

DUNLOP TOLL FREE SERVICE:1800 222 841 (Aust)0800 224 070 (NZ)
EMAIL: techinfo@ardexaustralia.com

CEMIX- TILE BOND LATEX A MODIFIED COPOLYMER LATEX FOR MIXING-Technical Data Sheet

tiler1 — Tue, 08 May 2012 10:43:46 +0000

CEMIX™ TILE BOND LATEX
A MODIFIED COPOLYMER LATEX FOR MIXING WITH
CEMIX TILE BOND TO GIVE IMPROVED ADHESION AND
FLEXIBILITY WHEN LAYING ALL TYPES OF TILES AND
SLATE ON DIFFICULT SURFACES
CEMIX TILE BOND LATEX can be used for ceramic tiles of every type including fully vitrified, monocottura
and quarry tiles, natural stone, marble, slate and large tiles on more difficult substrates such as wood,
particle board, fibre cement sheet, gib board etc. For use in areas such as shower recess and associated
walls and floors. Also for use over underfloor heating, exterior applications, over old tile flooring, vinyl
asbestos flooring, asphalt tiles and linoleum. CEMIX TILE BOND LATEX when mixed with CEMIX TILE BOND
can be used for grouting larger tiles, natural stone, slate etc. CEMIX TILE BOND LATEX and CEMIX TILE BOND
are water resistant when cured.

Technical Data Sheet

http://www.ralenti.co.nz/cemix_datasheets/9_2_TILE_BOND_LATEX.pdf

Cemix Limited
Cemix products are readily available from major building merchants throughout NZ
Phone:+64 (9) 636 1000

Email:

	Effectively Removes Water and Mineral Stains, Rust, Soap Scum and Mildew from Glass and Other Surfaces
	Works Great On: Shower Door Works Great On: Shower Door “GLASS ONLY”, Windows, Glass Surfaces, Tile and Fiberglass, Windshields, Chrome, Porcelain, Corian, Stainless Steel and Hard Vinyl
	Removes Stage 1 Corrosion Quickly… SEE IMPORTANT NOTE BELOW

Apply Bio-Clean to a surface with a dry cloth, sponge, brush or oscillating buffer. Press firmly to loosen stain with a rubbing action, then just rinse with water until residue free. Can be reapplied as needed until surface is clean. Stage 1 Corrosion is defined as glass with light corrosion, with little or no damage to the glass. Stage II Corrosion occurs when the deposits are no longer on the surface of the glass, but have started to break down the molecular structure of the glass, leaving an etched or white haze on the glass after the stain has been removed. Bio-Clean Water Stain Remover will not repair glass with Stage II Corrosion. (we are not responsible or liable if your stains/spots are at Stage II, therefore, we cannot accept returns on this item). DO NOT APPLY TO THE HARDWARE OF YOUR SHOWER DOOR. FOR GLASS ONLY.

Source: http://www.cleanshowerdoor.com/Bio.htm

HEAVY-DUTY TILE & GROUT CLEANER-high-alkaline cleaner and degreaser.

tiler1 — Tue, 13 Mar 2012 11:33:14 +0000

HEAVY-DUTY TILE & GROUT CLEANER-high-alkaline cleaner and degreaser.
DESCRIPTION:
AQUA MIX HEAVY-DUTY TILE & GROUT CLEANER is a
concentrated, high-alkaline cleaner and degreaser. Effectively
removes grease, soap scum, body oil, mildew stains, and algae
from areas that have been neglected or subjected to heavy use.
Specially formulated to strip off synthetic and acrylic waxes and
floor finishes.
USES:
Natural stone (such as granite, limestone, slate, and travertine),
ceramic, porcelain, quarry, saltillo, terra cotta, cement pavers,
masonry surfaces, linoleum, or resilient flooring.
TEST A SMALL AREA:
According to application instructions to determine desired results.
APPLICATION:
DO NOT KNEEL IN THIS PRODUCT. AVOID ALL SKIN CONTACT.
1) Read entire label before using.
2) Put on Rubber Gloves and Eye Protection.
3) Sweep, vacuum, or wipe surface.
4) Mix Heavy-Duty Tile & Grout Cleaner as follows: LIGHT SOIL
BUILD-UP: Mix 1 part cleaner to 5 parts water. MODERATE
SOIL BUILD-UP: Mix 1 part cleaner to 3 parts water. STRIPPING
OR HEAVY SOIL BUILD-UP: Mix 1 part cleaner to 2 parts water.
5) Apply solution to surface with mop or sponge.
6) Allow to dwell 3 to 5 minutes for cleaning, or 5 to 10 minutes
when stripping waxes or finishes.
7) Agitate with synthetic mop, scrub brush, or scrub machine. Do
not allow solution to dry on surface.
Mop up dirty solution.
9. Rinse thoroughly with clean water.
LIMITATIONS:
• Do not allow product to come in contact with any nonrecommended
surface.
• May adversely affect grout joints that have been coated with
colorant or grout stain.
• Regular use of high alkaline cleaners will reduce sealer life.
HANDLING AND STORAGE:
• Close container after each use.
• Store in original container only.
• Store and use between temperatures of 40 ºF and 90 ºF
(4 ºC and 32 ºC).
• Unused, stored product is freeze-thaw stable.
CAUTION:
• KEEP OUT OF REACH OF CHILDREN. DANGER
• Contains Sodium Hydroxide (CAS #1310-73-2)
• IMPROPER USE WILL CAUSE EYE AND SKIN INJURY.
• HARMFUL IF SWALLOWED.
• Rubber gloves and eye protection should be worn during application.
• DO NOT get in eyes or on skin or on clothing.
• DO NOT KNEEL on any surface where solution has been applied
and not thoroughly rinsed off.
• DO NOT apply with a sprayer. Avoid breathing mist or vapor.
• DO NOT MIX WITH OTHER CHEMICALS, AS HARMFUL FUMES
MAY RESULT.
• FIRST AID: SKIN CONTACT: Do not rub affected area.
Immediately flush with plenty of cold water for at least 15
minutes then follow with rinse of household vinegar. Get
immediate medical attention.
• CLOTHING CONTACT: Immediately remove dampened clothing
and treat affected skin as described above. Launder clothing
before re-wearing.
• EYE CONTACT: Immediately flush eyes with plenty of cold
water for at least 15 minutes. Get immediate medical attention.
Immediately remove and discard contact lenses if worn.
• INHALATION: Remove to fresh air. Get immediate medical attention.
• IF INGESTED: Do not induce vomiting. Drink at least 16 oz (.5 L)
of water. Get immediate medical attention.
WARRANTY:
SATISFACTION GUARANTEED. If not completely satisfied with this productís
performance, when used as directed, contact Aqua Mix for exclusive remedy
of either refund of purchase price or replacement of product upon return of
unused portion with proof of purchase within one year of purchase. Determining
suitability of product for any intended purpose shall be solely the responsibility
of the user. THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
THOSE OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, WHICH
EXTEND BEYOND THE DESCRIPTION ON THIS LABEL. IN NO EVENT SHALL AQUA
MIX BE LIABLE TO THE CUSTOMER OR ANYONE ELSE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES, HOWEVER OCCASIONED. ALWAYS TEST FIRST.

source: http://www.aquamix.com

Shower Power is more than just another bathroom cleaner

tiler1 — Tue, 13 Mar 2012 11:33:13 +0000

Shower Power

Shower Power is more than just another bathroom cleaner. It dissolves mineral deposits, hard water stains and soap scum, making them disappear with just a quick wipe.

Each case will be shipped directly to your door via UPS.

Original proven formula that works like a charm
Cuts through grime with minimal effort
Fresh minty scent

Order with Visa, MC, Amex, Discover, Paypal or Google Checkout.
We accept money orders and checks too, just select “pay by check/money order” when checking out!
Ordering online is 100% safe and secure!

Source: http://www.buyshowerpower.com/Shower-Power_p_2-6.html#

SHOWER POWER CITRUS FRESH – SHOWER POWER PINE FRESH-powerful shower cleaner

tiler1 — Tue, 13 Mar 2012 11:33:12 +0000

SHOWER POWER CITRUS FRESH – SHOWER POWER PINE FRESH

Shower Power removes bore water stains, limescale, calcium, soap scum, rust stains and is great for use in hard water areas.

Containing no chlorine, ammonia or phosphates, Shower Power is safe for bio-cycles and septic tanks. (Not tested on animals)

Use it on all surfaces such as fiberglass, taps, toilets, shower screens, baths, stainless steel, tiles, metal surfaces and chrome.

Shower Power is based on a mild, natural plant acid, combined with a rich surfactant system, using a special manufacturing process to unleash the powerful cleaning action.

A special foaming trigger or multi-holed cap delivers the product effectively and economically to the target surface.

This product exceeds Australian standards for biodegradability (Aust. Standards AS4351 ISO 7827-1994 OECD-301E for biodegradability)

Now also available in Pine Fresh, Shower Power will leave a fragrance of the outdoors wherever used.

The constant avalanche of ‘thank-you’ mail and phone calls received at OzKleen headquarters attests to the unique benefits Shower Power has to offer.

Shower Power Citrus Fresh and Shower Power Pine Fresh are available at supermarkets throughout Australia.

Source: http://www.ozkleen.com.au/

KLEENING HINTS – SHOWER POWER

THE AMAZING BATHROOM, SHOWER AND TOILET CLEANER

NO HARD SCRUBBING!! Simply squirt onto surface, leave for 30-60 seconds, rinse and wipe off.

Time Saving Hint:

Before you tackle the bathroom with Shower Power, remove rugs and sweep or vacuum hair and dust from sinks and floors. Use a paper towel to wipe first to save you the effort of cleaning hair and dust off the sponge, dispose of paper towel in bin. Now you’re ready to clean using Shower Power.

Bathtubs:

Regular cleaning with Shower Power will lessen hard soap-scum build up. After each use, wipe your bathtub with Shower Power and a sponge. The Shower Power Mate is ideal for baths. Baths are low to the ground, so using the Shower Power Mate can make cleaning easier. The long handle means less bending. Turn on bath tap and rinse the dissolved soap-scum down the drain.

Spas:

Empty spa water and wipe over with Shower Power. Leave for about 1 minute then rinse off. Your spa will look like new. Shower Power cleans and gleams!!

Tiles:

Ceramic tiles are extremely durable. Most tiles have a glazed glossy finish that protects the surface from stains and moisture. Unglazed tiles require additional care such as more frequent cleaning and occasional sealing. Squirt Shower Power directly onto the tiles you want to clean. Wipe over using a sponge or cloth, leave for 30-60 secs. then rinse off using the showerhead. Applying Shower Power using the Shower Power Mate makes it easier again. Fill the Shower Power Mate with Shower Power, turn to “ON” and you’re away. Shower Power will dispense out as you wipe your tiles. The Shower Power Mate has a non-scratch cleaning head unlike steel wool or abrasive products that can scratch the tile finish.

Grout:

Grout is rough and porous which attracts soap-scum and dirt. Remove this layer of grime first with Shower Power sprayed directly onto the surface, leave for 30-60 secs. and rinse off using the showerhead. Do not use nylon or short bristle brushes that can damage grout. The Shower Power Mate has a special non-scratch cleaning head that is ideal for wiping over grout. NOTE: Sometimes mould and grime can etch itself behind and in the grout making it impervious to cleaners. If this is the case, the surface is therefore damaged and you may need to re-grout. When you re-grout, be sure to kill all the mould or it may breed back through again. Don’t use steel wool – too much scrubbing can rub the dirt into pores!

Shower Screens:

Why do all that scrubbing when Shower Power does it for you? Some happy users prefer to clean the screen while in the shower. Simply squirt onto surface. Use your hands to wipe over (those with sensitive skin should use a cloth or the Shower Power Mate) leave for 30-60secs. and rinse off using the showerhead. The Shower Power Mate is ideal for screens and makes it so much quicker. The special non-scratch cleaning head won’t scratch your glass. The long handle means less leverage and saves you time.

Toilets:

Shower Power is brilliant for toilets and NEW Shower Power Pine leaves your toilet smelling fresh and clean. First remove dust using toilet paper or paper towel and flush down toilet. Spray up and around the rim of the bowl. Lightly use a toilet brush for inside areas and a cloth for the bowl. Flush toilet and wipe toilet with a moist cloth. BRILLIANT!!

CONTACT: