Protective coatings News

Anti-Slip Treatments to ceramic, porcelain and natural stone surfaces

Published: December 15, 2012

commentNo Comments

Anti-Slip Treatments We are able to apply Anti-Slip Treatments to ceramic, porcelain and natural stone surfaces. Different situations require different methods to achieve the desired result. We are able to perform several procedures, these are: Titanium Micro-pore Technology Non-Slip Surface Coatings Acid etching Sandblasting To achieve an Anti-Slip finish on this polished floor surface, several […]


Aqua Mix Aqua Stain is a concentrated translucent stain

Published: March 14, 2012

commentNo Comments

Aqua Mix Aqua Stain is a concentrated translucent stain. DESCRIPTION/FEATURES:Aqua Mix Aqua Stain is a concentrated translucent staindesigned to change the color and enhance the natural texture ofporous adobe clay tile. Aqua Stain for Saltillo is available in fivedesigner colors: Adobe Red, Fresco Peach, Piso Blanco, SpanishOak and Terra Cotta. May also be used as […]


Nanoprotect GC-Self-Assembling Nano-Hydrophobic Glass & Ceramic Treatment

Published: March 14, 2012

commentNo Comments

Nanoprotect® GC is a one component, ultra thin, hydrophobic Nanotechnology surface treatment for glass and glazed ceramic surfaces. The product uses molecular bonding with the substrate to form a nano scale surface structure that is repellent to water. Description Chemical engineered nanoparticles self assemble into this monolayer (one particle thick) and protect the substrate from […]


CEMIX- TILE and SLATE SEALER-Technical Data Sheet

Published: March 14, 2012

commentNo Comments

CEMIX™ TILE and SLATE SEALER SLATE, CONCRETE AND EXPOSED CONCRETE SEALERA solvent based clear film forming, sealing and dust-proofing coating. Has good flexibility, is long-lastingand will not yellow, crack or peel when properly applied. CEMIX TILE & SLATE SEALER has a positivepenetration into the surface.   Technical Data Sheet http://www.ralenti.co.nz/cemix_datasheets/12_2_CEMIX_TILESLATE_SEALER.pdf Cemix LimitedCemix products are readily […]


CONCRÈME – the ultimate sealing technology for the protection of engineering concrete

Published: March 14, 2012

commentNo Comments

CONCRÈME™ CONCRÈME™ is the the ultimate sealing technology for the protection of engineering concrete and masonry from damage caused by water and water bourne salts. CONCRÈME™ is the worlds only low VOC silane which passes California’s new strict VOC guidelines and the new international VOC guidelines. CONCRÈME™ is a permanent bonding alkyl alkoxy silane in […]


STAIN-PROOF – the world leading, permanent impregnating sealer developed by Dry-Treat

Published: March 14, 2012

commentNo Comments

 Dry-Treat Dry-Treat manufactures innovative sealers for porous building materials, including natural stone, brick, paving, tiles engineering concrete and grout. Our aim is to continue developing new technologies which provide effective protection from common problems, including: water ingress, staining, salt attack (efflorescence), picture framing and graffiti. Dry-Treat innovation Dry-Treat began in 1991 as a premium developer […]


DRY-TREAT 100N -impregnating, invisible and breathable sealer that protects engineering concrete

Published: March 14, 2012

commentNo Comments

DRY-TREAT 100N DRY-TREAT 100N is an impregnating, invisible and breathable sealer that protects engineering concrete from damage caused by water and water-borne chloride ion salts. Exposed surfaces become easier to clean, maintain and keep looking good for longer. DRY-TREAT 100N provides lasting protection for engineering concrete. Typical applications: DRY-TREAT 100N is suitable for a wide […]


WATER-REPELLA is a penetrating, invisible and breathable sealer

Published: March 14, 2012

commentNo Comments

WATER-REPELLA WATER-REPELLA is a penetrating, invisible and breathable sealer that protects porous tile, natural stone, paving and grout from damage caused by water and salts. Treated indoor and outdoor surfaces become easier to clean, maintain and keep looking good for longer. WATER-REPELLA is an economical sealer for engineering concrete, terracotta tile, cast stone, paving, limestone, […]


DRY-TREAT 40N is an impregnating, invisible and breathable sealer

Published: March 14, 2012

commentNo Comments

DRY-TREAT 40N DRY-TREAT 40N is an impregnating, invisible and breathable sealer that protects porous tile, natural stone, paving and grout from damage caused by water and salts. Treated indoor and outdoor surfaces become easier to clean, maintain and keep looking good for longer. DRY-TREAT 40N provides lasting protection for engineering concrete, render, terracotta tile, cast […]


« Previous Page



TileShop DOMAINNAMERZ CanadaTiles TileAustralia Tiler1 TilerAustralia 0800TILESCOM 0800tilesNZ Tiling TilesAmerica TilesNewYork 0800tilesUK LATiles Tiler
Ducati848 DDUCATI YAMAHAR6 TILESTORE HondaCBR BathroomDesign OpeninghoursWS TilesChicago WDPage NZVisitMe 027Directory SeeInsideWs
700JetSki 900 bikes Boats LovechToday Melbournetileshops ClosingNet Lovech V12 Fishoogle YourLove 359BG Rabotno 52 News AustraliaCarpet Ottyk
KawasakiNinja 0800tiler Ducati1198 Interiors ShopsSydney TileStore 1198 ChicagoTS TilesNZ StoreHours OpeningHours Adhesives Jet-Ski
TShops Grout CCCodes TSydney OPENINGHOURZ TSAustralia ClosimgZ OpeningEU tileshopsbiz closingUK iClosing NYTShops Tadhesives
LondonTS TorontoTS Brisbane ChicagoTS LSstores iOpening TilerNZ HOUSTONTS SydneyS LondonUK TadhesiveNZ AtilerNZ BBathrooms
NEWZEALANDVISIT HoursNZ iopeningUK JetSki LovechD UKTS TLDN4 TstoresINFO EuroexINFO TILESHOPZ SEEINSIDER TadhesivesUK